diff --git a/drivers/usb/gadget/regs-otg.h b/drivers/usb/gadget/regs-otg.h
new file mode 100644
index 0000000..3737e45
--- /dev/null
+++ b/drivers/usb/gadget/regs-otg.h
@@ -0,0 +1,271 @@
+/* linux/arch/arm/plat-s3c/include/plat/regs-otg.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * Registers remapping:
+ * Lukasz Majewski <l.majewski@samsumg.com>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_OTG_HS_H
+#define __ASM_ARCH_REGS_USB_OTG_HS_H
+
+/* USB2.0 OTG Controller register */
+struct s3c_usbotg_phy {
+	u32 phypwr;
+	u32 phyclk;
+	u32 rstcon;
+};
+
+/* Device Logical IN Endpoint-Specific Registers */
+struct s3c_dev_in_endp {
+	u32 diepctl;
+	u8  res1[4];
+	u32 diepint;
+	u8  res2[4];
+	u32 dieptsiz;
+	u32 diepdma;
+	u8  res3[4];
+	u32 diepdmab;
+};
+
+/* Device Logical OUT Endpoint-Specific Registers */
+struct s3c_dev_out_endp {
+	u32 doepctl;
+	u8  res1[4];
+	u32 doepint;
+	u8  res2[4];
+	u32 doeptsiz;
+	u32 doepdma;
+	u8  res3[4];
+	u32 doepdmab;
+};
+
+struct ep_fifo {
+	u32 fifo;
+	u8  res[4092];
+};
+
+/* USB2.0 OTG Controller register */
+struct s3c_usbotg_reg {
+	/* Core Global Registers */
+	u32 gotgctl; /* OTG Control & Status */
+	u32 gotgint; /* OTG Interrupt */
+	u32 gahbcfg; /* Core AHB Configuration */
+	u32 gusbcfg; /* Core USB Configuration */
+	u32 grstctl; /* Core Reset */
+	u32 gintsts; /* Core Interrupt */
+	u32 gintmsk; /* Core Interrupt Mask */
+	u32 grxstsr; /* Receive Status Debug Read/Status Read */
+	u32 grxstsp; /* Receive Status Debug Pop/Status Pop */
+	u32 grxfsiz; /* Receive FIFO Size */
+	u32 gnptxfsiz; /* Non-Periodic Transmit FIFO Size */
+	u8  res1[216];
+	u32 dieptxf[15]; /* Device Periodic Transmit FIFO size register */
+	u8  res2[1728];
+	/* Device Configuration */
+	u32 dcfg; /* Device Configuration Register */
+	u32 dctl; /* Device Control */
+	u32 dsts; /* Device Status */
+	u8  res3[4];
+	u32 diepmsk; /* Device IN Endpoint Common Interrupt Mask */
+	u32 doepmsk; /* Device OUT Endpoint Common Interrupt Mask */
+	u32 daint; /* Device All Endpoints Interrupt */
+	u32 daintmsk; /* Device All Endpoints Interrupt Mask */
+	u8  res4[224];
+	struct s3c_dev_in_endp in_endp[16];
+	struct s3c_dev_out_endp out_endp[16];
+	u8  res5[768];
+	struct ep_fifo ep[16];
+};
+
+/*===================================================================== */
+/*definitions related to CSR setting */
+
+/* S3C_UDC_OTG_GOTGCTL */
+#define B_SESSION_VALID		(0x1<<19)
+#define A_SESSION_VALID		(0x1<<18)
+
+/* S3C_UDC_OTG_GAHBCFG */
+#define PTXFE_HALF			(0<<8)
+#define PTXFE_ZERO			(1<<8)
+#define NPTXFE_HALF			(0<<7)
+#define NPTXFE_ZERO			(1<<7)
+#define MODE_SLAVE			(0<<5)
+#define MODE_DMA			(1<<5)
+#define BURST_SINGLE			(0<<1)
+#define BURST_INCR			(1<<1)
+#define BURST_INCR4			(3<<1)
+#define BURST_INCR8			(5<<1)
+#define BURST_INCR16			(7<<1)
+#define GBL_INT_UNMASK			(1<<0)
+#define GBL_INT_MASK			(0<<0)
+
+/* S3C_UDC_OTG_GRSTCTL */
+#define AHB_MASTER_IDLE		(1u<<31)
+#define CORE_SOFT_RESET		(0x1<<0)
+
+/* S3C_UDC_OTG_GINTSTS/S3C_UDC_OTG_GINTMSK core interrupt register */
+#define INT_RESUME			(1u<<31)
+#define INT_DISCONN			(0x1<<29)
+#define INT_CONN_ID_STS_CNG		(0x1<<28)
+#define INT_OUT_EP			(0x1<<19)
+#define INT_IN_EP			(0x1<<18)
+#define INT_ENUMDONE			(0x1<<13)
+#define INT_RESET			(0x1<<12)
+#define INT_SUSPEND			(0x1<<11)
+#define INT_EARLY_SUSPEND		(0x1<<10)
+#define INT_NP_TX_FIFO_EMPTY		(0x1<<5)
+#define INT_RX_FIFO_NOT_EMPTY		(0x1<<4)
+#define INT_SOF			(0x1<<3)
+#define INT_DEV_MODE			(0x0<<0)
+#define INT_HOST_MODE			(0x1<<1)
+#define INT_GOUTNakEff			(0x01<<7)
+#define INT_GINNakEff			(0x01<<6)
+
+#define FULL_SPEED_CONTROL_PKT_SIZE	8
+#define FULL_SPEED_BULK_PKT_SIZE	64
+
+#define HIGH_SPEED_CONTROL_PKT_SIZE	64
+#define HIGH_SPEED_BULK_PKT_SIZE	512
+
+#define RX_FIFO_SIZE			(1024*4)
+#define NPTX_FIFO_SIZE			(1024*4)
+#define PTX_FIFO_SIZE			(1536*1)
+
+#define DEPCTL_TXFNUM_0		(0x0<<22)
+#define DEPCTL_TXFNUM_1		(0x1<<22)
+#define DEPCTL_TXFNUM_2		(0x2<<22)
+#define DEPCTL_TXFNUM_3		(0x3<<22)
+#define DEPCTL_TXFNUM_4		(0x4<<22)
+
+/* Enumeration speed */
+#define USB_HIGH_30_60MHZ		(0x0<<1)
+#define USB_FULL_30_60MHZ		(0x1<<1)
+#define USB_LOW_6MHZ			(0x2<<1)
+#define USB_FULL_48MHZ			(0x3<<1)
+
+/* S3C_UDC_OTG_GRXSTSP STATUS */
+#define OUT_PKT_RECEIVED		(0x2<<17)
+#define OUT_TRANSFER_COMPLELTED	(0x3<<17)
+#define SETUP_TRANSACTION_COMPLETED	(0x4<<17)
+#define SETUP_PKT_RECEIVED		(0x6<<17)
+#define GLOBAL_OUT_NAK			(0x1<<17)
+
+/* S3C_UDC_OTG_DCTL device control register */
+#define NORMAL_OPERATION		(0x1<<0)
+#define SOFT_DISCONNECT		(0x1<<1)
+
+/* S3C_UDC_OTG_DAINT device all endpoint interrupt register */
+#define DAINT_OUT_BIT			(16)
+#define DAINT_MASK			(0xFFFF)
+
+/* S3C_UDC_OTG_DIEPCTL0/DOEPCTL0 device
+   control IN/OUT endpoint 0 control register */
+#define DEPCTL_EPENA			(0x1<<31)
+#define DEPCTL_EPDIS			(0x1<<30)
+#define DEPCTL_SETD1PID		(0x1<<29)
+#define DEPCTL_SETD0PID		(0x1<<28)
+#define DEPCTL_SNAK			(0x1<<27)
+#define DEPCTL_CNAK			(0x1<<26)
+#define DEPCTL_STALL			(0x1<<21)
+#define DEPCTL_TYPE_BIT		(18)
+#define DEPCTL_TYPE_MASK		(0x3<<18)
+#define DEPCTL_CTRL_TYPE		(0x0<<18)
+#define DEPCTL_ISO_TYPE		(0x1<<18)
+#define DEPCTL_BULK_TYPE		(0x2<<18)
+#define DEPCTL_INTR_TYPE		(0x3<<18)
+#define DEPCTL_USBACTEP		(0x1<<15)
+#define DEPCTL_NEXT_EP_BIT		(11)
+#define DEPCTL_MPS_BIT			(0)
+#define DEPCTL_MPS_MASK		(0x7FF)
+
+#define DEPCTL0_MPS_64			(0x0<<0)
+#define DEPCTL0_MPS_32			(0x1<<0)
+#define DEPCTL0_MPS_16			(0x2<<0)
+#define DEPCTL0_MPS_8			(0x3<<0)
+#define DEPCTL_MPS_BULK_512		(512<<0)
+#define DEPCTL_MPS_INT_MPS_16		(16<<0)
+
+#define DIEPCTL0_NEXT_EP_BIT		(11)
+
+
+/* S3C_UDC_OTG_DIEPMSK/DOEPMSK device IN/OUT endpoint
+   common interrupt mask register */
+/* S3C_UDC_OTG_DIEPINTn/DOEPINTn device IN/OUT endpoint interrupt register */
+#define BACK2BACK_SETUP_RECEIVED	(0x1<<6)
+#define INTKNEPMIS			(0x1<<5)
+#define INTKN_TXFEMP			(0x1<<4)
+#define NON_ISO_IN_EP_TIMEOUT		(0x1<<3)
+#define CTRL_OUT_EP_SETUP_PHASE_DONE	(0x1<<3)
+#define AHB_ERROR			(0x1<<2)
+#define EPDISBLD			(0x1<<1)
+#define TRANSFER_DONE			(0x1<<0)
+
+#define USB_PHY_CTRL_EN0                (0x1 << 0)
+
+/* OPHYPWR */
+#define PHY_0_SLEEP                     (0x1 << 5)
+#define OTG_DISABLE_0                   (0x1 << 4)
+#define ANALOG_PWRDOWN                  (0x1 << 3)
+#define FORCE_SUSPEND_0                 (0x1 << 0)
+
+/* URSTCON */
+#define HOST_SW_RST                     (0x1 << 4)
+#define PHY_SW_RST1                     (0x1 << 3)
+#define PHYLNK_SW_RST                   (0x1 << 2)
+#define LINK_SW_RST                     (0x1 << 1)
+#define PHY_SW_RST0                     (0x1 << 0)
+
+/* OPHYCLK */
+#define COMMON_ON_N1                    (0x1 << 7)
+#define COMMON_ON_N0                    (0x1 << 4)
+#define ID_PULLUP0                      (0x1 << 2)
+#define CLK_SEL_24MHZ                   (0x3 << 0)
+#define CLK_SEL_12MHZ                   (0x2 << 0)
+#define CLK_SEL_48MHZ                   (0x0 << 0)
+
+/* Device Configuration Register DCFG */
+#define DEV_SPEED_HIGH_SPEED_20         (0x0 << 0)
+#define DEV_SPEED_FULL_SPEED_20         (0x1 << 0)
+#define DEV_SPEED_LOW_SPEED_11          (0x2 << 0)
+#define DEV_SPEED_FULL_SPEED_11         (0x3 << 0)
+#define EP_MISS_CNT(x)                  (x << 18)
+#define DEVICE_ADDRESS(x)               (x << 4)
+
+/* Core Reset Register (GRSTCTL) */
+#define TX_FIFO_FLUSH                   (0x1 << 5)
+#define RX_FIFO_FLUSH                   (0x1 << 4)
+#define TX_FIFO_NUMBER(x)               (x << 6)
+#define TX_FIFO_FLUSH_ALL               TX_FIFO_NUMBER(0x10)
+
+/* Masks definitions */
+#define GINTMSK_INIT	(INT_OUT_EP | INT_IN_EP | INT_RESUME | INT_ENUMDONE\
+			| INT_RESET | INT_SUSPEND)
+#define DOEPMSK_INIT	(CTRL_OUT_EP_SETUP_PHASE_DONE | AHB_ERROR|TRANSFER_DONE)
+#define DIEPMSK_INIT	(NON_ISO_IN_EP_TIMEOUT|AHB_ERROR|TRANSFER_DONE)
+#define GAHBCFG_INIT	(PTXFE_HALF | NPTXFE_HALF | MODE_DMA | BURST_INCR4\
+			| GBL_INT_UNMASK)
+
+/* Device Endpoint X Transfer Size Register (DIEPTSIZX) */
+#define DIEPT_SIZ_PKT_CNT(x)                      (x << 19)
+#define DIEPT_SIZ_XFER_SIZE(x)                    (x << 0)
+
+/* Device OUT Endpoint X Transfer Size Register (DOEPTSIZX) */
+#define DOEPT_SIZ_PKT_CNT(x)                      (x << 19)
+#define DOEPT_SIZ_XFER_SIZE(x)                    (x << 0)
+#define DOEPT_SIZ_XFER_SIZE_MAX_EP0               (0x7F << 0)
+#define DOEPT_SIZ_XFER_SIZE_MAX_EP                (0x7FFF << 0)
+
+/* Device Endpoint-N Control Register (DIEPCTLn/DOEPCTLn) */
+#define DIEPCTL_TX_FIFO_NUM(x)                    (x << 22)
+#define DIEPCTL_TX_FIFO_NUM_MASK                  (~DIEPCTL_TX_FIFO_NUM(0xF))
+
+/* Device ALL Endpoints Interrupt Register (DAINT) */
+#define DAINT_IN_EP_INT(x)                        (x << 0)
+#define DAINT_OUT_EP_INT(x)                       (x << 16)
+#endif